Home –> Pool Accessories –> Wood Fired Pool Heaters –> Wood Heater Parts & Accessories

Pete Port & Digital Thermometer

• Accurately measure the incoming and outgoing water temperatures of the heater to see the increase in temperature that you are producing.
• Excellent way to fine tune your fire burning skills and efficiency by making sure you are getting the best results possible.

The 2 brass Pete Plugs are threaded into the T-pipes, & installed on both the inlet & outlet of the wood heater. Push the digital thermometer into the Pete Plug and down into the water stream. The Pete plug automatically seal’s as you remove the thermometer or instert it (NO LEAKS). The thermometer reports the water temp. to 0.1 of a degree, and updates every 2 seconds. Not only is this kit helpful, but it is quite a bit of fun to use.

Water Bypass Valve Kit

HIGHLY recommended for all installations. There are 4 good reasons to install the pool heater like this.

1. Regulate water flow through the heater, reducing back presure on the pump. Most common with 1.5 Horse power water pumps or larger.
2. During long periods of not burning the pool heater, it’s a good idea to shut off the water through it & drain the water out of the drain plugs(included with all stoves).
3. If the heater was to leak for some reason, you could shut off the water to the pool heater and keep your pool pump/filter running, while you fix the leak.
4. If you need to SHOCK chlorinate the pool, or anytime your water PH level is not great, the heat exchangers life will be extended if you shut off the water for 1 day.

Pool Hose Adapter Kit

This kit is for customers who want to hook up the wood pool heater up to an above ground pool using hoses, not pvc pipe. We recommend installing a water bypass valve kit and then gluing on these adapters.

The kit includes what you see in the picture below, Two 1.5 inch pvc couplers (Female threads to slip), two male threaded nylon fittings and 2 radiator hose clamps. The pool hose will tightly slide over the nylon barbed fitting & be clamped on with the radiator hose clamps, it’s very simple.

Standard Heater Parts

This is standard 24″ inch long, single wall steel stove pipe. 1 piece comes standard with each stove. Additional pieces can be added to make a higher chimney. If you order extra stove pipes, they will be shipped with your heater at no additional shipping cost. Please mention your request when placing an order. All 3 Heaters = 8″ Diameter = $18.00 ea.	This vent cap comes standard with all heaters. 1 extra cap PRICE = $19.00

This is our standard thermometer which comes with all heaters. This high quality magnetic thermometer is used to determine the temperature of your stove pipe, which is directly related to how well the water is being heated while running through your heater. PRICE = $17.00 ea.

• You have no shipping charges on Accessories when ordered with a Pool Heater.
  If you need any parts, not being shipped with a heater, Shipping/Handling is based on your zip code. Please call for rates. (Multiple items will get a shipping discount)

Click here to order or request more information